Saving System Configuration Information - Samsung DCS-VIP Quick Manual

DCS-VIP Internet Keyphone
4 4
Saving System Configuration Informa a tion Saving System Configuration Inform
When you have finished setting the system configuration information through WIZARD SETUP
and have changed the system IP address using ADVANCE SETUP, you must save the settings.
First, the settings must be saved into the flash memory for the VIP router, the keyphones and
the optional VoIP card. Second, you must save the configurations for each of these items into
files on the PC's hard disk. These saved configurations can be restored to your system if needed
later. Follow this procedure (steps 1 –3).
1. Save the Router Configuration to Flash Memory
i) Click the SYSTEM MANAGEMENT
Save/Restore screen appears.
ii) Specify the Operation to Perform parameter as Save Configuration. Click the Set button.
It will take a short time to save the system configura tion information in the me mory.
Note
If you changed the DCS-VIP system IP address, you must change the TCP/IP properties of the PC connected
to the DCS-VIP system to those which best match the DCS-VIP system IP address. Make sure that the DNS
numbers of the ISP are configured in the PC.
2. Save the Keyphone and VoIP Configurations to
Flash Memory
This must be done using MMC programming on a display keyphone as described here. Both the
keyphone and VoIP configurations are saved using MMC 818, Back-Up Data Base. Refer to your
Samsung DCS-VIP Internet Keyphone Programming Manual for a fuller description, if needed.
— >
MIB SAVE/RESTORE menu. The following MIB
— 20 —
Quick Guide
tion