Conference Call; Do Not Disturb; Exclusive Hold On Outside Line - Iwatsu enterprise cs Quick Reference Manual

Conference Call

The Iwatsu Enterprise-CS allows you to make confer-
ence calls with any combination of up to four internal
and outside lines on the same call.
To Make a Conference Call:
While speaking on an internal or outside call:
• Press the Conference [ADD] key (The Conference
[ADD] key LED will flash to indicate that the call is
on hold).
• Make your next call (internal or outside call).
• When the party you are calling answers, press the
Conference [ADD] key again to complete the con-
ference.
• After you hear a tone burst, all parties are con-
nected.
To add another party to the conference, repeat same
procedure.

Do Not Disturb

If you do not wish to be disturbed, you can set your
extension to prevent any calls from ringing to or get-
ting through to your extension.
• Do not lift receiver.
• Press the [HOLD/DND] key.
• The lamp on the [HOLD/DND] key will stay lit.
To cancel Do Not Disturb
• Do not lift receiver.
• Press the [HOLD/DND] key.
•
The lamp on the [HOLD/DND] key will go out.
Note: See [Hold/Quick Forward].

Exclusive Hold On Outside Line

A call on "exclusive" hold may only be picked up from
your extension.
While speaking on an outside call:
• Press the key for the outside line you are already
using.
• The green lamp on that outside line key will flash
slowly on your phone.
• The red lamp will stay lit at other extensions.
To retrieve a call on Exclusive Hold:
• Press the same outside line key on your phone
again to be connected to the call.
Flash
Flash allows you to receive dial tone on the same
outside line that you are using without having to hang
up. Flash may also be used to receive intercom dial
tone to place another intercom call.
After you complete a call or if you make a dialing
mistake:
• Press [FLASH].
• Dial the new number.
To Use Centrex or PBX features:
• Press [S FLASH].
• Dial the new number or feature code.
9