Related Manuals for Iwatsu Enterprise C5
Summary of Contents for Iwatsu Enterprise C5
- Page 1 1-800-974-5070 www.iwatsu.com Iwatsu Voice Networks 8001 Jetstar Drive Printed in USA Irving, TX 75063 Part Number: 108640 ECS_SLT_QRG_7.06.05 Thursday, July 21, 2005 09:35 pages 1 and 16 Composite...
-
Page 2: Basic Features
INTRODUCTION NOTES: Using the Receiver Button to Access Iwatsu System Features By performing a hook switch flash (quickly pressing and releasing the Receiver Button) and dialing the desired Feature Operation Code, you can easily access ADIX or Enterprise-CS features. Each feature operation code must be programmed in the ADIX or Enterprise-CS database by your system installer. -
Page 3: Receiving A Second Call
NOTES: Receiving A Second Call When you are speaking on a call and hear a tone signaling another incoming call: • Quickly press release receiver button • Dial the Hold code to put the first call on hold • Quickly press release receiver... -
Page 4: Advanced Features
The system automatically dials the last number you dialed. Universal Night Answer ........9 911 Support At default, your Iwatsu System is programmed to automatically contact your local Public Safety Answering Point (PSAP) when 911 is dialed. Enhanced 911 Service ensures that when 911 is dialed from a system extension, information that allows the PSAP to identify the caller’s location in a... -
Page 5: Flexible Call Forwarding
INDEX Flexible Call Forwarding You can set your phone to forward calls to another Symbols extension or to an external telephone number. To forward calls externally, you must first register the 911 Support ..........3 external telephone number to a personal speed dial code (90-99.) (See the Speed Dial feature in the Single Line Telephone User Quick Reference Guide.) -
Page 6: Call Pickup
FEATURE OPERATION CODES Set Follow Me Destination • Lift the receiver To access the features listed below, lift the receiver, • Enter the Call Forward Destination then follow the operation instructions. Use the Code • Enter the Call Type you wish to forward column to write the operation code programmed in 1 = All calls (Outside Line/Intercom) your system database. -
Page 7: Message Waiting
• When you hear the dial tone, dial the Busy Number Callback Code If the extension you called is an Iwatsu digital • Enter the time in minutes (1-9) at which you telephone, the lamp on the message button [MSG] want to be called back will light. -
Page 8: Speed Dial
Multi-Line (Up To 3 Outside + 1 Inside, Or 2 Speed Dial Outside + 2 Inside) To Register Personal Speed Dial Numbers While speaking on an outside call: • Lift the receiver • Quickly press release receiver • Dial the Speed Dial Registration code button then dial the Personal Speed Dial Code •...