Answering Machine Emulation; Voice Mail Monitor - Iwatsu enterprise cs Quick Reference Manual

To delete a call record from system memory:
• With a call record displayed, press the [USD] key.
To make a call by automatically dialing the Caller
ID number:
• Display a call record.
• Press the [USAS] key, [USAT] + trunk group num-
ber.
or
• [UST] key a second time.
or
• Press [FLT], [OPT], or [COL].
To add digits to the displayed number before dial-
ing out:
• Dial the additional digits to be added to the outgo-
ing number (the added digits do not appear on the
display when entered).
• Press the [USAS] key, [USAT] + trunk group num-
ber
or
• [UST] key a second time.
or
• Press [FLT], [OPT], or [OPT].

Answering Machine Emulation

(Voice Mail Monitor)

Voice mail messages can be monitored as they are
recorded. While monitoring the recording, the station
user may elect to initiate a conversation with the
caller. You may activate or deactivate this feature
from your extension.
To begin Voice Mail Monitor:
When a call is answered by voice mail at an idle sta-
tion, you will hear a monitor tone.
• The [Voice Mail Monitor] key red LED will begin to
flash.
• Press the [Voice Mail Monitor] key.
• When the [Voice Mail Monitor] key green LED
lights, you will hear the caller's message as it is
recorded
• Press the [Voice Mail Monitor] key a second time
to begin talking to the caller.
or
• Press [SPKR] or hang up to end voice mail
monitoring. The caller's message will be saved to
your voice mailbox.
To activate / deactivate or change the Voice Mail
Monitor mode:
• While your station is idle, press [SPKR].
• Press [FEAT].
• Press the [Voice Mail Monitor] key.
• Press 1 to deactivate Voice Mail Monitoring.
•
Press 2 to activate manual Voice Mail
Monitoring.
• Press 3 to activate auto Voice Mail Monitoring.
6