Bluetooth Audio; Media Format; Setting Bluetooth Audio - Subaru 2015 Forester Owner's Manual

Hide thumbs Also See for 2015 Subaru Forester:
Table of Contents

Advertisement

NOTE
. The Bluetooth
®
audio function may
not operate properly under the follow-
ing conditions.
The device is turned off.
The battery of the device has run
down.
The device is not connected to
the system.
The device is behind the seat or
in the glove box.
A metal material is covering or
touching the device.
. Depending on the type of device that
is used, operation and sound volume
may be different from normal use of
those devices.
. The sound quality may degrade due
to the influence of the device that is
connected to the system or the circum-
stances of the Bluetooth network.
. When another Bluetooth
®
simultaneously connected, noise may
be heard.

Media format

®
Bluetooth
audio devices cannot be
connected if they are not compatible with
®
the following Bluetooth
profiles.
. A2DP (Advanced Audio Distribution
Profile)
. AVRCP (Audio/Video Remote Control
Profile)
Setting Bluetooth
NOTE
For models with the multi function
display, Bluetooth
via the multi function display. For
details, refer to
setting
3-83.
MENU button
TRACK dial (type
A, B, C and D audio)
device is
TRACK dial (type
E audio)
1. Select the BT-A SETUP menu by
pressing the MENU button. For details,
refer to Other settings
2. Perform the following procedure by
operating the TRACK dial while BT-A is
displayed.
NOTE
You cannot set Bluetooth
driving.
®
audio
Registering (pairing) device
NOTE
Only one device can be registered. If
®
audio can be set
you want to register another device,
delete the previously registered device
®
Bluetooth
audio
and then perform the registering pro-
cedure. For details about deleting a
device, refer to Deleting device
38.
1. Select the PAIR AUDIO menu.
MEMORY FULL will be displayed
and the mode will change to the
Bluetooth
2. After the passkey is shown on the
display, input the passkey into the device.
PAIRED will be displayed and the
registration procedure will be finished.
FAILED will be displayed, the regis-
tration procedure was not successful
and the mode will change to the
5-10.
Bluetooth
5-37
®
Audio/Bluetooth
audio
®
audio while
If a device is already registered,
®
audio setting mode.
If you input the correct passkey,
If you input an incorrect passkey,
®
audio setting mode.
CONTINUED
5-

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Forester 2014

Table of Contents