3-52
Instruments and controls/Multi function display
8. After entering the name by repeating
step 7, select Set by operating the
switch and confirm the setting by pulling
the
/SET switch toward you.
9. The system will notify you that the
setting is complete.
If a birthday is approaching, the following
screen will be displayed accompanied by
a beep when the ignition switch has been
turned to the ON position. This function
can be set to on or off. For details, refer to
Bypass screen setting
3-64.
From 1 to 7 days prior to the birthday
On a birthday (displayed in red)
NOTE
If
_ _
is selected for either the
Month
or
Day
item instead of
numbers, the birthday notification will
be deactivated.
Anniversary setting
1. Perform the preparation steps accord-
ing to Preparation for date setting
49.
3-