Audio Setting (If Equipped) - Subaru 2015 Forester Owner's Manual

3-82
Instruments and controls/Multi function display
5. Reconfirmation will be displayed. If
you are sure you want to proceed, select
Yes by operating the switch.
6. Confirm the setting again by pulling
the /SET switch toward you.
7. The system will notify you that the
setting is complete.

Audio setting (if equipped)

MENU button
Control dial (type A,
B, C and D audio)
Control dial (type E
audio)
You can set the audio by operating the
multi function display.
1. Display the audio screen. For details,
refer to Basic screens 3-40.
2. Press the MENU button on the audio
set to display the audio setting screen.
The menus are shown in the following
table.
First menu Second menu
Pair Audio
Select Audio
BT Audio
Setup
Set Passkey
Delete Audio
Speed
Volume
HD Radio*
Beep
Go Back
*: If equipped
To select the next menu in the same
layer (first or second menu): Press the
MENU button.
To enter the second menu: Press the
control dial while the BT Audio Setup
menu is selected.
Page
3-83
3-83
3-84
3-84
3-84
3-84
3-84