3. Select the setting location (left, center
or right) by operating the
switch. Then pull the
/SET switch
toward you.
NOTE
The same item cannot be selected for
the left, center or right location.
4. Select the preferred item by operating
or
the
or
switch. Then pull the
SET switch toward you.
If you also want to change the setting for
another location, repeat steps 3 and 4.
5. Select Set by operating the
Instruments and controls/Multi function display
switch, and confirm the setting by pulling
the
/SET switch toward you.
/
6. The system will notify you that the
setting is complete.
Clock/calendar screen setting
1. Perform the preparation steps accord-
ing to Preparation for screen settings
3-59.
3-63
CONTINUED