Subaru 2015 Forester Owner's Manual page 191

3-54
Instruments and controls/Multi function display
7. Select characters by operating the
or switch. Then pull the
SET switch toward you.
You can select characters of the
English alphabet (upper case charac-
ters and lower case characters are
available), eleven symbols or blank
spaces.
The word being edited will be
displayed with an underline.
8. After entering the name by repeating
/ step 7, select Set by operating the
switch and confirm the setting by pulling
the /SET switch toward you.
9. The system will notify you that the
setting is complete.
If an anniversary is approaching, the
following screen will be displayed accom-
panied by a beep when the ignition switch
has been turned to the ON position. This
function can be set to on or off. For details,
refer to Bypass screen setting
From 1 to 7 days prior to the anniversary
3-64.