Tire Care Maintenance And Safety Practices; Vehicle Load Limit How To Determine - Subaru 2015 Forester Owner's Manual

Hide thumbs Also See for 2015 Subaru Forester:
Table of Contents

Advertisement

13-10
Consumer information and Reporting safety defects/Tire information
Tire care
maintenance and
safety practices
.
Check on a daily basis that the
tires are free from serious damage,
nails, and stones. At the same time,
check the tires for abnormal wear.
.
Inspect the tire tread regularly
and replace the tires before their
tread wear indicators become visi-
ble. When a tire s tread wear
indicator becomes visible, the tire
is worn beyond the acceptable limit
and must be replaced immediately.
With a tire in this condition, driving
at even low speeds in wet weather
can cause the vehicle to hydro-
plane. Possible resulting loss of
vehicle control can lead to an
accident.
.
To maximize the life of each tire
and ensure that the tires wear
uniformly, it is best to rotate the
tires every 7,500 miles (12,000 km).
For information about the tire rota-
tion order, refer to Tire rotation
11-30
Replace any damaged or
.
unevenly worn tires at the time of
rotation. After tire rotation, adjust
the tire pressures and make sure
the wheel nuts are correctly tigh-
tened. For information about the
tightening torque and tightening
sequence for the wheel nuts, refer
to Flat tires
9-5
.
Vehicle load limit
determine
The load capacity of your vehicle is
determined by weight, not by avail-
able cargo space. The load limit of
your vehicle is shown on the
vehicle placard attached to the
driver s side B-pillar. Locate the
statement The combined weight
of occupants and cargo should
never exceed XXX kg or XXX lbs
on your vehicle s placard.
The vehicle placard also shows
seating capacity of your vehicle.
The total load capacity includes the
total weight of driver and all pas-
sengers and their belongings, any
cargo, any optional equipment such
as a trailer hitch, roof rack or bike
carrier, etc., and the tongue load of
a trailer. Therefore cargo capacity
can be calculated by the following
method.
Cargo capacity = Load limit − (total
weight of occupants + total weight
of optional equipment + tongue
load of a trailer (if applicable))
how to
For information about vehicle load-
ing, refer to Loading your vehicle
8-12
.
For information about towing capa-
city and weight limits, refer to
Trailer towing
8-18
.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Forester 2014

Table of Contents