Subaru 2015 Forester Owner's Manual page 310

Preparation for using the Hands-
free system
When no cell phones are regis-
tered
Before using the Hands-free system, it is
necessary to register a cell phone in the
system. Perform the following procedure
to register a cell phone.
1. Press the OFF hook switch
2. Select ENGLISH / FRANÇAIS
operating the TUNE/TRACK dial.
3. Press the TUNE/TRACK dial when
the language of your choice is displayed.
WELCOME! will be displayed.
Voice prompts will now begin to
help guide you through the pairing
process.
4. Press the TUNE/TRACK dial or the
talk switch to begin the pairing
process.
5. Perform either of the following proce-
dures.
Select the RECORD NAME menu
by using the TUNE/TRACK dial or
Press the talk switch
the steering wheel.
6. Say the name (voice tag) to be
registered.
7. Press the talk switch and say the
word Confirm to confirm the recorded
name.
Go to your phone s setting menu
and access the Bluetooth device
menu.
Scan for available Bluetooth de-
vices.
CAR M_MEDIA should be dis-
played on your phone as an available
device. Select this device.
After CAR M_MEDIA is selected,
.
a pass key will be displayed.
by
8. Input the displayed pass key from the
radio into the cell phone while PKY: ****
is displayed on the radio.
If you input the correct pass key,
PAIRED will be displayed and the
registration procedure will be finished.
If you input an incorrect pass key,
FAILED will be displayed and the
registration procedure will not be
successful.
Registering a cell phone
To register a cell phone to the in-vehicle
equipment, perform the following proce-
dure.
located on
1. Select the SETUP menu.
2. Select the PHONE SETUP menu.
3. Select the PAIR PHONE menu.
4. Perform either of the following proce-
dures.
Audio/Hands free system
Select the RECORD NAME
menu.
Press the talk switch
5. Say the name (voice tag) to be
registered.
6. Select the CONFIRM menu.
After CAR M_MEDIA is displayed,
a pass key will be displayed.
7. Input the displayed pass key into the
cell phone while PKY: **** is displayed.
If you input the correct pass key,
PAIRED will be displayed and the
registration procedure will be finished.
If you input an incorrect pass key,
FAILED will be displayed and the
registration procedure will not be
successful.
Selecting a cell phone
To select the registered cell phone for
connecting to the in-vehicle equipment,
perform the following procedure.
1. Select the SETUP menu.
2. Select the PHONE SETUP menu.
3. Select the SELECT PHONE menu.
If no cell phones are registered,
EMPTY will be displayed and the
mode will change to the PHONE
SETUP mode.
4. Select the cell phone by performing
CONTINUED
5-51
.