Avaya 3920 Installation Manual page 41

Planning and Installation Guide
To install repeaters in a daisy-chain configuration, you must perform the following
steps:
Install the repeater configuration software on a PC. See
1
Install the Repeater Configuration Software" on page
Register repeater N to the base. See
2
the Base" on page
Connect repeater N to the PC running the repeater configuration software.
3
See "Procedure 3: Configure Repeater N" on page
Connect repeater N1 to the PC running the repeater configuration software.
4
See "Procedure 4: Configure Repeater N1" on page
Register repeater N1 to the base. See
5
to the Base" on page
Configure the remaining repeaters. See
6
Repeaters" on page
Find the right location for the repeaters. See
7
Location" on page
Install the repeaters. See
8
Before you begin, make sure you have:
• the customized RJ-11 splitter (provided with the repeater)
• the customized RJ-11 to serial DB9 PC connection cable (provided with the
repeater)
• the repeater configuration software CD
• a working base unit
• a working handset registered to that base unit
• any repeaters you want to register to this base. (You must complete the
registration process separately for each repeater.)
• a PC that will run the repeater configuration software
42.
45.
46.
48.
"Procedure 8: Install the Repeater" on page
Installing a Repeater in a Daisy-Chain Configuration
42.
"Procedure 2: Register Repeater N to
43.
44.
"Procedure 5: Register Repeater N1
"Procedure 6: Configure Additional
"Procedure 7: Find the Right
4 Installing a Repeater
"Procedure 1:
50.
41