Real-Time Monitoring - Chamberlain Elite EL25 Programming Manual

Release Door
Cycle Relay
3 Enter Door Number (1-4)
4 Only for 122 or 123 - Enter the Latch Time (hhmm=Hour and Minute). Then (
Example A:
from EL25
Activates Relay(s) assigned to "Door 2" in
Example B:
using a Phone -
NOT IN Programming Mode
IN Programming Mode
Example D:
from EL25
Enable or Disable Real-Time Monitoring:
Enables/Disables real-time transaction monitoring.
1 Press Then
2 Enable (1) or Disable (0). Then (
Continued from previous page
Resets the door's relays associated with
Then
default state.
If you release a door from a "Latch Door Open Until" command, the
door's relays will deactivate (e.g., the door will lock ).
If you release a door from a "Latch Door Closed Until" command, the
door's relays will stay deactivated (e.g., the door will stay locked ).
Momentarily activates a specific relay not necessarily associated
Then
with Your Door Settings
or the Relay Number when Cycling Relay (1-4). Then (
2
Your Door Settings
1 2
Activates Relay(s) assigned to Door "2" until 8:20 am.
Example C:
using a Phone -
2
Automatically Allows Door "2" to lock if unlocked.
2
Runs complete Cycle on Relay 2.

Real-Time Monitoring

24
Factory Setting: Disabled
# )
Page 62
Your Door Settings
. For testing purposes only .
# )
Required
)
#
Optional, Press (
Relay(s) will activate now
3
when the final pound key (
3
3
Relay will activate now
3
Example:
1
Enables the real-time monitoring.
to its
) to Skip.
#
# ) is pressed.
4
2