Speaker-Microphone Settings 18; Enable Or Disable Call Waiting - Chamberlain Elite EL25 Programming Manual

Set a Phone Number's Extension Delay Time:
When the EL25 is programmed to dial a resident with a phone number and extension , and the extension
needs to be entered a short time after the automated phone system's greeting message has finished, the unit
allows a delay time, between the phone number and the extension number or call forward extension number.
Factory Setting: No Delays
1 Press
2 Enter Directory Code (Up to 2 Digits). Then (
3 Enter Phone Extension Delay (0-30 seconds). Then (
4 Enter Call Forward Extension Delay (0-30 seconds). Then (
Example:
Gives Directory Code "7" a 10 second Delay between its phone number and extension number.
Speaker / Microphone Settings
18
Set Speaker Volume:
Allows the visitor to hear the resident at the unit.
1 Press Then
2 Enter Speaker Level (0 = Mute, 1 = Low through 10 = Highest). Then (
Set Microphone Volume:
Allows the resident to hear the visitor at the unit.
1 Press Then
2 Enter Microphone Level (0 = Mute, 1 = Low through 10 = Highest). Then (

Enable or Disable Call Waiting

If your on your phone and a visitor attempts to contact you from the unit, you will hear
phone. You can press " 2 " on your phone to toggle between the phone call and the visitor. This feature only
works for a single-family residence or a manager's phone sharing a phone line with the EL25.
Setting: Enabled
1 Press Then
2 Enable (1) or Disable (0). Then (
If you make an error during an entry, press the asterisk key (
110
Then
)
#
)
#
1
Factory Setting: 5
19
Factory Setting: 5
Example:
# )
1
Disables the call waiting.
Page 55
# )
2 3 4
Note: The visitor can adjust the speaker
volume on unit with this key. Unit will
return to programmed volume setting
# )
when call is complete.
# )
2
) to begin again.
*
Required Step
Optional Step,
Press ( # ) to Skip.
9
2 short tones in your
Factory