Assigning Door Use And Unlock Time Zones 11 - Chamberlain Elite EL25 Programming Manual

Assigning Door Use and Unlock Time Zone
Unlock Time Zones allow you to automatically unlock and lock doors/gates at times you specify.
Assign "Door Use Time Zone":
Door Use Time Zone allows you to set up time periods and days during which access is restricted for all entry
codes, cards, and transmitters. For example, to prohibit residents from entering the building through Door 2
on Sundays, create a time zone that excludes Sunday and assign it to Door 2.
1 Press Then
2
Enter Door Number (1 to 4). Then (
3 Enter Time Zone Number (0 to 63). Then (
0 = Full Restrictions 1 = Full Access
Enable or Disable Unlock Schedule:
Enable or disable auto unlock/lock schedule as necessary.
1 Press Then
2 Enable (1) or Disable (0). Then (
Example:
Assign Door Auto Lock / Unlock Schedule:
Assign an auto unlock/lock schedule to a door. During the schedule, the door will be unlocked. For example, if
the main door has a schedule from 8AM to 5PM, the door will unlock at 8AM and lock at 5PM.
Factory Setting: Disabled
1 Press Then
2 Enter Door Number (1 to 4). Then (
3 Enter Schedule Number (2 to 63; or 99). Then (
If you make an error during an entry, press the asterisk key (
63
# )
)
#
Example:
1
Assigns door "2" to use time zone "3".
11
)
#
1
Auto unlock/lock schedule is disabled.
31
)
#
)
#
Example:
1
Assigns door "1" to unlock schedule "2".
Page 47
Factory Setting: Enabled
2 3
Factory Setting: Enabled
2
Note: Use a schedule number of "99" to disable
autolock/unlock schedule for a particular door.
2 3
) to begin again.
*