Entry Codes are programmable, numeric codes (3-9 digits in length) that allow entry or exit through
a gate/door. Residents enter their assigned entry code onto the unit's keypad to prompt the system
to grant access.
To use an existing Entry Code:
On the unit's keypad, enter the assigned "Entry Code".
Resident keys in personal Entry Code
Before adding or modifying Entry Codes, answer the following questions:
•
Have you chosen the Entry Code number you will assign? This number will be assigned to a resident. The
resident will enter this number on the unit keypad to prompt the system to grant access.
•
Will the Entry Code have a use schedule (a.k.a. Time Zone)? You may assign a schedule to an Entry Code
so that it is valid only during specified time frames.
•
What schedules will the Entry Code use at each door? You may assign a schedule at each door that a
resident may enter through.
Entry Codes
About Entry Codes
If you make a mistake entering the code, press
Page 31
EL25 grants entry