Visitor Communication Settings 5 14 - Chamberlain Elite EL25 Programming Manual

Visitor Communication Settings
Enable or Disable "Access Granted" Beeps:
Factory Setting: Enabled
1 Press Then
2 Enable (1) or Disable (0). Then (
Enable or Disable Voice Mail:
If a voice mail system is connected to a resident's telephone line, the unit allows the visitor to dial an
extension during a resident call. If enabled , the visitor places a resident call, the voice mail system answers
the call, the visitor can then dial an extension on the unit keypad.
1 Press Then
2 Enable (1) or Disable (0). Then (
Change the Visitor Call Response Keys:
When a visitor contacts a resident with the EL25, the resident can allow entry by pressing one of the keys on
their phone. Options are:
Activate all Entry Devices on Door 1 Relay(s)
Activate all Entry Devices on Door 2 Relay(s)
Activate all Entry Devices on Door 3 Relay(s)
Activate all Entry Devices on Door 4 Relay(s)
Toggle between the visitor and another phone call.
Extend the talking time with a visitor.
Hang Up and Deny Access to the Visitor
To change these Response Keys:
1 Press
2 Enter Door 1 Relay (0-9 or
3 Enter Door 2 Relay (0-9 or
4 Enter Door 3 Relay (0-9 or
Example:
Changes the phone key that operates Door 1 Relay(s) to "8". If a resident presses "8" on their
phone while speaking to a visitor, the Door 1 Relay(s) will activate.
23
Example:
1
)
#
Disables the access granted beeps.
22
Example:
# )
116
Then
* ). Then ( # ) 5 Enter Door 4 Relay (0-9 or
). Then ( )
* # 6 Call Wait Toggle (0-9 or
* ). Then ( # ) 7 Extend Talk Time (0-9 or
1
2
Page 56
Note: This will disable the 10
short beeps used by "Direct
Command Responses" and
"Other Responses".
2
See page 16.
Factory Setting: Disabled
1 2
Enables the voice mail.
Note: The asterisk key (
will not
this programming sequence
because the asterisk key (
may be assigned to a specific
phone key response.
* ). Then (
). Then (
* #
* ). Then (
3 4 5 6 7
* )
cancel a command in
* )
Required Step
Optional Step,
Press ( ) to Skip.
#
# )
)
# )