Chamberlain Elite EL25 Programming Manual page 66

Glossary Glossary
Gate or Door - Used synonymously throughout the manual, these terms refer to controllable entry/exit areas of the
G
complex, normally a gate or door.
H
Holiday Schedules - Holiday schedules will modify fixed schedules for selected holiday dates.
I
ID Number - One part of the number sequence on a transmitter.
M
Manager - This person manages a complex and/or programs the system.
NPBI system
- No Phone Bill Interface. Uses main phone line like a intercom system between EL25 and the resident
N
phone. No monthly or per call telephone charges.
PBX - A PBX telephone system (Automated) needs to dial a specific number (0-9) then pause briefly, allowing the PBX
system to connect to an outside phone line, then the phone number can be dialed.
P
PIN Code - Personal Identification Number predefined for a HID card or Transmitter.
Programming Number - This is a number that the EL25 uses to program a function. Each number performs a specific
task.
Radio Frequency (RF) and Wiegand Module
Passport™ transmitters. Each Wiegand module provides Wiegand inputs for two card readers or other compatible
devices.
Relay
- A device that responds to an electric current by activating other devices, allowing the system, for example, to
lock or unlock a door/gate, shunt (i.e., reroute) alarm contacts, signal an alarm, or turn on a camera that transmits its
R
images to a closed circuited television (CCTV).
Resident - Person occupying and/or who has entry access to the building or complex that is controlled by a EL25 unit.
The term "resident" as used in the context of the manual refers to such persons as homeowners, tenants of an
apartment complex, etc.
Schedules - You can restrict the use of access codes/transmitters by setting limits on the days and times they may be
S
used. Schedules may also be assigned to doors to restrict residents from gaining access to the building.
Sequence Code - One part of the number sequence of a transmitter.
Telco Mode - Uses the main telephone line for the unit's communications to a house or complex.
Transaction - System activity logged and recorded into the EL25's memory. Such activity includes visitor to resident
T
directory calls and transmitter, card, or code activity.
Transmitter - A resident-activated clicker device used to gain entry into a controlled area.
Unit
- The unit houses the EL25's core components. All system programming will be routed to the EL25.
U
Unit ID Code
- Identification number for each unit in a multiple unit setup sharing the same phone line.
Versa XS - The software to program the EL25 with.
V
Visitor - A visitor can communicate with residents via the EL25. A resident can grant or deny a visitor access with their
touch tone phone.
- Each RF module is an RF receiver that is compatible with Chamberlain
Page 65