Table of Contents
Advertisement
Entry Codes
—
—
—
About Entry Codes
Entry codes are programmable, numeric codes (4-5 digits in length) that allow entry or exit through a gate/door.
Tenants enter their assigned code onto the Mini-Key's keypad to prompt the system to grant access.
The programming sequences described in this section define which entry codes can gain access. Keep track of
what entry codes you have added to the system and to whom they have been assigned. This will allow you to
void a code to prevent future access to the building or complex. The MINIKEY has a capacity for 500 entry
codes.
M
-K
T
INI
EY
IMER
The MINIKEY system supports an input from an external timer. This feature provides the ability to restrict
certain entry codes from gaining access during a specified time. Consult the installing dealer for information if
this option is required but not implemented.
Enter Timer Code "1" if you want an entry code to be restricted during the specified time.
—
Enter Timer Code "0" if you do not want an entry code to be restricted.
—
E
C
S
NTRY
ODE
PECIFICATIONS
Entry codes are factory set to 4 digits long.
4-digit code range is 0000-9999.
—
5-digit code range is 00000-99999.
—
Adding an Entry Code
1.
2. Entry Code (4 or 5 digits)
3. Relay Code (1-7; see note below)
4. Timer Code (0 or 1; see note below)
5.
Example: 5 + 6666 + 1 + 0 + #
Sets code "6666" to cycle relay 1 for the activation time regardless of timer settings.
Entry Codes
Mini-Key Unit
Doc 6001050, Rev E
Entry to
Building/Complex
Page 6 of 8
Advertisement
Table of Contents
