For details on [REC] mode menu settings, refer to P29.
Setting colour effects for the recorded pictures.
Applicable modes:
[OFF]:
This is the standard setting.
[B/W]:
The picture becomes black and white.
[SEPIA]:
The picture becomes sepia.
[COOL]:
The picture becomes bluish.
[WARM]:
The picture becomes reddish.
Note
When in Intelligent auto mode, only [B/W] or [SEPIA] can be selected.
•
The Intelligent auto mode is set separately from the other recording modes.
•
[COLOR EFFECT] becomes disabled when colour bracket is set.
•
For details on [REC] mode menu settings, refer to P29.
Adjusting the picture quality for the recorded pictures.
Applicable modes:
[CONTRAST]:
[r]: Increases the difference between the brightness and the darkness in the picture.
[s]: Decreases the difference between the brightness and the darkness in the picture.
[SHARPNESS]:
[r]: The picture is sharply defined.
[s]: The picture is softly focused.
[SATURATION]:
[r]: The colours in the picture become vivid.
[s]: The colours in the picture become natural.
[NOISE REDUCTION]:
[r]: The noise reduction effect is enhanced.
Picture resolution may deteriorate slightly.
[s]: The noise reduction effect is reduced.
You can obtain pictures with higher resolution.
Note
When you take pictures in dark places, picture noise may become noticeable. If picture noise
•
becomes a problem, we recommend that you take pictures after increasing the setting for
[NOISE REDUCTION] or lowering the setting for each of the items other than
[NOISE REDUCTION].
Advanced (Recording pictures)
[COLOR EFFECT]
[PICT.ADJ.]
³±´²
- 132 -