¿
[REC] mode:
Taking pictures that match the scene being
recorded
(
When you select a scene mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
Slide the [REC]/[PLAYBACK] selector switch to [!].
Set the mode dial to [¿].
Press 3/4/2/1 to select the scene mode.
You can switch menu screens from any menu item by rotating
•
the zoom lever.
Press [MENU/SET] to set.
The menu screen is switched to the recording screen in the
•
selected scene mode.
∫ About the information
If you press [DISPLAY] when selecting a scene mode in step
•
explanations about each scene mode are displayed. (If you press
[DISPLAY] again, the screen returns to the scene mode menu.)
Note
To change the scene mode, press [MENU/SET] and then press 1, and return to step
•
Refer to
P70
for information about the shutter speed.
•
The scene mode flash setting is reset to the initial setting when the scene mode is changed.
•
When you take a picture with a scene mode that is not adequate for the purpose, the hue of the
•
picture may differ from the actual scene.
The following items cannot be set in scene mode because the camera automatically adjusts
•
them to the optimal setting.
[INTELLIGENT ISO]/[SENSITIVITY]/[ISO LIMIT SET]/[METERING MODE]/[I.EXPOSURE]/
–
[COLOR EFFECT]/[PICT. ADJ.]/[MIN. SHTR SPEED]/[FLASH SYNCHRO]
[I.EXPOSURE] is activated automatically in the following scene modes.
•
[PARTY]/[CANDLE LIGHT]/[BABY1]/[BABY2]/[SUNSET]/[HIGH SENS.]
–
Advanced (Recording pictures)
: Scene mode)
3
,
- 96 -
3
above.