∫ About AF area selection
You can select the AF area by pressing [AF#/FOCUS] when [
selected.
It is also possible to switch to AF area selection screen by pressing 1 when AF mode is
selected with 3/4.
You can set from the quick menu.
•
When selecting [ƒ], [Ø] or [Ù]
1
Press 3/4/2/1 to move the AF area.
You can set to arbitrary position of the
•
screen. (It cannot be set to edge of the
screen)
After moving the AF area, press [DISPLAY]
•
to return it to the centre.
2
Press [MENU/SET] to set.
When selecting [
1
Press 3/4/2/1 to select AF
area as shown in the figure to the
right.
2
Press [MENU/SET] to set.
Note
The spot metering target can also be moved to match the AF area when using [Ù].
•
Position of the AF area will return to initial state when the camera is set to Intelligent auto
•
mode, When the power save mode is activated, or When this unit is turned off.
Advanced (Recording pictures)
(P31)
]
ƒ Ø
- 128 -
], [ƒ], [Ø] or [Ù] is
Ù