1:Close the card/battery door.
2:Slide the card/battery door to the end
and then close it firmly.
If the card/battery door cannot be completely
•
closed, remove the card, check its direction and
then insert it again.
Note
Remove the battery after use.
•
Do not remove the battery while the power is on as the settings on the camera may not be
•
stored properly.
The supplied battery is designed only for the camera. Do not use it with any other equipment.
•
Before removing the card or battery, turn the camera off, and wait until the power lamp has
•
gone off completely.
(Otherwise, this unit may no longer operate normally and the card itself may be damaged or the
recorded pictures may be lost.)
Preparation
- 23 -