Panasonic Lumix DMC-FZ28 Operating Instructions Manual page 80

Table of Contents

Advertisement

Note
When the burst mode setting is set to Unlimited
The burst speed becomes slower halfway. The exact timing of this depends on the type of
card, the picture size and the quality.
You can take pictures until the capacity of the built-in memory or the card is full.
The focus is fixed when the first picture is taken.
When the burst speed is set to [˜], the exposure and white balance are fixed at the settings
used for the first picture for the subsequent pictures as well. When the burst speed is set to
[ò], they are adjusted each time you take a picture.
When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3.
If you are following a moving subject while taking pictures in a place (landscape) indoors,
outdoors etc. where there is a large difference between the light and shade, it may take time
until the exposure is stable. If burst is used at this time, the exposure may not become optimal.
The burst speed (pictures/second) may become slower depending on the recording
environment such as in dark places, if the ISO sensitivity is high etc.
Burst mode is not cancelled when the camera is switched off.
If you take pictures in burst mode with the built-in memory, it will take time to write the picture
data.
[Œ] is set for the flash when burst is set.
Auto bracket/colour bracket is cancelled when burst is set.
Advanced (Recording pictures)
- 80 -

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents