Note
When using a tripod etc., setting the self-timer to 2 seconds is a convenient way to avoid the
•
jitter caused by pressing the shutter button.
When you press the shutter button once fully, the subject is automatically focused just before
•
recording. In dark places, the self-timer indicator will blink and then may turn on brightly
operating as an AF assist lamp
We recommend using a tripod when recording with the self-timer.
•
The number of pictures which can be taken in burst mode is fixed to 3.
•
The number of pictures which can be taken in [FLASH BURST]
•
Depending on the recording conditions, the recording interval may become more than
•
2 seconds when [10S/3PICTURES] is selected.
The flash output may not be constant when [10S/3PICTURES] is selected.
•
[10S/3PICTURES] cannot be set when auto bracket or colour bracket is set, or when the scene
•
mode [FLASH BURST] is set.
Self-timer cannot be set to 2 seconds or [10S/3PICTURES] in Intelligent auto mode.
•
Self-timer cannot be used while in [HI-SPEED BURST] in scene mode.
•
You cannot use the following functions when [10S/3PICTURES] is selected.
•
Burst mode
–
[AUDIO REC.]
–
Advanced (Recording pictures)
(P135)
to allow the camera to focus on the subject.
- 75 -
(P101)
is fixed to 5.