Press [MENU/SET] to set.
After completing the clock settings, turn the camera off. Then turn the camera back on,
•
switch to recording mode, and check that the display reflects the settings that were
performed.
When [MENU/SET] has been pressed to complete the settings without the clock having
•
been set, set the clock correctly by following the
procedure below.
Select [CLOCK SET] in the [REC] or [SETUP] menu, and press 1.
It can be changed in steps
•
The clock setting is maintained for 3 months using the built-in clock battery even
•
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
Note
The clock is displayed when [DISPLAY] is pressed several times during recording.
•
You can set the year from 2000 to 2099.
•
If the clock is not set, the correct date cannot be printed when you stamp the date on the
•
pictures with [TEXT STAMP]
If the clock is set, the correct date can be printed even if the date is not displayed on the screen
•
of the camera.
Preparation
Changing the clock setting
5
6
and
to set the clock.
(P150)
or order a photo studio to print the pictures.
- 27 -
"
Changing the clock setting
(P29)
"