Panasonic Lumix DMC-FZ28 Operating Instructions Manual page 37

w [RESET]
When the [RESET] setting is selected during recording, the operation that resets the lens is
•
also performed at the same time. You will hear the sound of the lens operating but this is
normal and not indicative of malfunctioning.
When [SETUP] menu settings are reset, the following settings are also reset. In addition,
•
[FAVORITE] (P157)
set to [ON].
[ZOOM RESUME]
–
The birthday and name settings for [BABY1]/[BABY2]
–
The [TRAVEL DATE]
–
The [WORLD TIME]
–
The folder number and the clock setting are not changed.
•
x [USB MODE]
When [PC] is selected, the camera is connected via the "USB Mass Storage" communication
•
system.
When [PictBridge(PTP)] is selected, the camera is connected via the "PTP (Picture Transfer
•
Protocol)" communication system.
| [VIDEO OUT]
This will work when the AV cable is connected.
•
The [REC] or [SETUP] menu settings are reset to the initial
settings.
in [PLAYBACK] mode menu is set to [OFF], and [ROTATE DISP.]
(P111) setting. (Departure date, return date, destination)
(P114) setting.
Select the USB communication system after or before connecting
the camera to your PC or your printer with the USB connection
cable (supplied).
y [SELECT ON CONNECTION]:
Select either [PC] or [PictBridge(PTP)] if you connected the
camera to a PC or a printer supporting PictBridge.
{ [PictBridge(PTP)]:
Set after or before connecting to a printer supporting PictBridge.
z [PC]:
Set after or before connecting to a PC.
Set to match the colour television system in each country.
(Playback mode only)
[NTSC]: Video output is set to NTSC system.
[PAL]: Video output is set to PAL system.
Preparation
(P98) and [PET]
- 37 -
(P156) is
(P99) in scene mode.