[Digital Zoom]; H [Color Effect] - Panasonic LUMIX DMC-FX150 Operating Instructions Manual

Advanced (Recording pictures)
∫ About automatic gain control setting
Select [AUTO GAIN] on the screen shown in step
[ON]: The brightness level is adjusted according to the number of pictures taken
and the pictures are superimposed over each other.
[OFF]: Compensate the exposure to match the subject so that all the superimposed
exposure effects will be just right.
Note
•
The recording information displayed for pictures taken with multiple exposures is the recording
information for the last picture taken.
•
If [MENU/SET] is pressed while taking pictures, the photographed images are recorded, and
the multiple exposure picture-taking session will be completed.
•
Image is not recorded until completion.
•
Some functions have restrictions. You will not be able to use the following functions:
–
Burst mode/[AUTO BRACKET]/[COLOR BRACKET]/Extra optical zoom/Digital zoom/
[I.EXPOSURE]/[AUDIO REC.]
•
We recommend using a tripod if taking pictures with multiple exposures.
• The multiple exposure setting is released at the following times:
– When the power has been turned off
–
When the card has been changed
–
When the USB connection cable has been connected to the camera
–
When the camera has been switched from [REC] mode to playback mode
–
When the position of the mode dial has been changed
•
[PICTURE SIZE] is fixed when [START] is selected.
•
The zoom position and white balance are fixed when the first picture is taken.
For details on [REC] mode menu settings, refer to P18.
This can enlarge subjects even more than the optical zoom or extra optical zoom.
Applicable modes:
[OFF]/[ON]
Note
•
Refer to P31 for details.
•
If camera shake (jitter) is a problem during zooming, it is recommended that [STABILIZER] be
set to [AUTO] or [MODE 1].
For details on [REC] mode menu settings, refer to P18.
Setting colour effects for the recorded pictures.
Applicable modes:
[OFF]:
[B/W]:
[SEPIA]:
[COOL]:
[WARM]:
Note
•
When in Intelligent auto mode, only [B/W] or [SEPIA] can be selected.
•
The Intelligent auto mode is set separately from the other recording modes.
•
[COLOR EFFECT] becomes disabled when colour bracket is set.
72
VQT1T00

)[DIGITAL ZOOM]

³²¿n

H [COLOR EFFECT]

ñ³²n
This is the standard setting.
The picture becomes black and white.
The picture becomes sepia.
The picture becomes bluish.
The picture becomes reddish.
1
and set it.