Preventing Jitter (Camera Shake); Direction Detection Function; Enlarge The Focus Point (Display Focus Point) - Panasonic Lumix DMC-FZ28 Operating Instructions Manual

When the jitter alert [
(P74).
Shutter speed will be slower particularly in the following cases. Keep the camera still from the
•
moment the shutter button is pressed until the picture appears on the screen. We recommend
using a tripod.
Slow sync./Red-eye reduction
–
[NIGHT PORTRAIT] and [NIGHT SCENERY] in the advanced scene mode
–
In [PARTY], [CANDLE LIGHT], [STARRY SKY] or [FIREWORKS] in scene mode
–
When the shutter speed is slowed in [MIN. SHTR SPEED]
–
Pictures recorded with the camera held vertically are played back vertically (rotated). (Only
when [ROTATE DISP.]
Pictures may not be displayed vertically if they were taken with the camera aimed up or down.
•
Pictures cannot be displayed vertically when recording motion pictures or creating flip
•
animations.

Enlarge the focus point (display focus point)

This unit will remember the focus point during the recording, and it can be enlarged with
that point as a centre.
Press [AF#/FOCUS] during image playback
Focus point may not be the centre of enlargement when it is
•
at the edge of the image.
"
Refer to Using the Playback Zoom
•
during zooming.
It will return to the original enlargement if [AF#/FOCUS] is
•
pressed again.
Following pictures cannot be enlarged because there is no
•
focus point:
Picture that was taken without focusing
–
Picture that was taken with manual focus
–
Picture that was taken with a different camera
–

Preventing jitter (camera shake)

] appears, use [STABILIZER] (P133), a tripod or the self-timer

Direction detection function

(P156) is set to [ON])
"
(P58)
- 51 -
Basic
for operation
(P91)
(P96)
W T