II. UNPACKING AND INSTALLATION
When bringing something metal from a cold environment into a warm environment,
drops of water may adhere to the metal surfaces. This phenomenon is known as con-
densation. If a machine is used while it has condensation on it, it is possible that it will
become unable to copy images. For this reason, when moving the machine from a cold
environment to a warm one, prior to installation, it is recommended that the machine be
allowed to sit in its packing material for at least an hour or more in order for it to warm
up to room temperature.
The steps for unpacking and installing this unit are outlined below.
A. Open the packaging and remove the packing materials.
B. Install the cartridge.
C. Load paper into the cassette.
D. Load paper into the multi-feeder.
E. Attach the tray and the power cord.
F. Check the copy image.
G. Set up the fax function (for those machines equipped with a fax function).
COPYRIGHT © 1999 CANON INC.
Download Free Service Manual at http://printer1.blogspot.com
CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
11-3