A.
CCD unit
1) Remove the 2 installation screws,
remove the copyboard glass stay,
and then take out the copyboard
glass.
2) Unclip the tab [1] and remove the
CCD connector [2].
3) Remove the analog processor PCB
connector [3] and flat cable [4].
4) Remove the 4 installation screws [5]
and then remove the CCD unit.
COPYRIGHT © 1999 CANON INC.
Download Free Service Manual at http://printer1.blogspot.com
CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE PROCESSING SYSTEM
[2]
[1]
Figure 4-401
[4]
[3]
[5]
[5]
Figure 4-402
4-11