Copy Operation Overview - Canon GP160F Service Manual

CHAPTER 2 BASIC OPERATION
B.

Copy operation overview

This unit will, depending on the copy mode set by the customer, automatically oper-
ate in the direct copy mode or memory copy mode.
Memory copy: After storing all the image data read from one job in the image data
housing memory DRAM (IC7, IC8, IC9, IC10) on the image processor PCB, the printing
operation begins.
The operating conditions for the copy mode and memory copy mode are described
below.
Conditions for the different copying methods
Document scanning mode
Book mode*1
Sheet mode
No designation
*1 Book mode is when the document is set on the copyboard glass and then copied.
*2 Sheet mode is when the document is set in the ADF and then copied.
Reference:
When copying using the multi-feeder pick-up, memory copying will take place no mat-
ter what conditions are in effect.
2-2
Download Free Service Manual at http://printer1.blogspot.com
Copy mode
No designation
Sort mode
For 2 in 1 mode
Other than sort
mode, 2 in 1 mode
Copy by multi-feeder
pick-up
Table 2-101
COPYRIGHT © 1999 CANON INC.
Number of copies
1 to 99
No designation
No designation
1 sheet
2 sheets or more
No designation
CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Copy method
Direct copy
Memory copy
Memory copy
Direct copy
Memory copy
Memory copy