Canon GP160F Service Manual page 344

CHAPTER 13 TROUBLESHOOTING
Control memory data are deleted or initialized according to the items listed below by
using Service Mode #8 CLEAR.
Before performing this procedure, be sure to print a backup data list.
Operation name Contents
TEL Data entered in User data 2. TEL # REGISTRATION
USER SW Data that are entered in User data 1. DATA REGISTRATION and data
entered in Service mode settings #1-#3. However, the data in the
FILE SETTINGS of User data 1. DATA REGISTRATION are not delet-
ed or initialized.
SERVICE SW User data, data in service mode items #6, #7
NCU Data in service mode settings #4A, #4B
ISDN Data in service mode setting #4C
SERVICE DATA Management data system dump list data
REPORT Management data activity management report data
COUNTER Print counter data from management data system dump
ALL All user data, service mode setting items, management data and
image data except service mode setting #5 and the print counter
from management data system dump
9. ROM information display (#9 ROM)
Shows the image processor PCB's ROM DIMM management information (version
no., checksum, etc.) on the display.
10. CS SET (mirror mount initialization setting)
When this item is set, the mirror mount moves to the position set when shipped.
13-110
Download Free Service Manual at http://printer1.blogspot.com
Table 13-528
COPYRIGHT © 1999 CANON INC. CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)