Lan Setup; Lan Interface Setup - Planet WNRT-633 User Manual

5.4 LAN Setup

There are two ways to assign IP addresses to computers:

Static IP Address (set the IP address for every computer manually)

Dynamic IP Address (IP address of computers will be assigned by a router automatically)
It is recommended for most of computers to use dynamic IP address, because it will save a lot of time
on setting IP addresses for every computer, especially when there are a lot of computers in the
network; for servers and network devices which will provide services to other computers and users that
come from Internet, static IP address should be useful, so other computers are able to locate the
server. You can configure the IP parameters of the LAN on the screen as below.

5.4.1 LAN Interface Setup

Choose menu "LAN Setup  LAN Interface", and you can configure the parameters for LAN (Local
Area Network). After the configuration, please click the "Apply" button to save the settings.
The page includes the following fields:
Object
IP Address
Subnet Mask
Default Gateway
Figure 5-4-1 LAN Interface Setup screenshot
The LAN IP address of the WNRT-633, and default is 192.168.1.1. You
can change it according to your request.
Default is 255.255.255.0. You can change it according to your request.
Default is 192.168.1.1. You can change it according to your request.
-44-
User's Manual of WNRT-633
Description