®
Invacare
- PRONTO M41
7.8.4
Removing/Installing the swingarm assembly
1
Screws
2
Locknut
3
Spacer
Removing the swingarm assembly
●
Remove the front caster assembly, as described in chapter 8.7.4
●
Remove the drive wheel, as described in chapter 8.7.5.
●
Ensure the front and top covers are removed. Refer to chapter 8.8.1 and chapter 8.8.2.
●
Remove the four screws (1) that secure the swingarm (4) assembly to the motor.
●
Remove the locknut (2) and spacer (3) that secure the swingarm (4) assembly and bracket (8)
to the frame (9).
Installing the swingarm assembly
●
Install the locknut (2) and spacer (3) that secure the swingarm (4) assembly and bracket (8) to
the frame.
●
Install the four screws (1) that secure the swingarm (4) assembly to the motor (5).
●
Install the drive wheel, as described in chapter 8.7.5.
●
Ensure the front and top covers are installed. Refer to chapter 8.8.1 and chapter 8.8.2.
●
Install the front caster assembly, as described in chapter 8.7.4.
4
Swingarm
7
5
Motor
8
6
Spring
9
Hook
Bracket
Frame
SERVICE MANUAL
47