Repositioning The Joystick Mounting Bracket (Office Style Seat) - Invacare ProntoM41 Service Manual

SERVICE MANUAL

7.11.2 Repositioning the joystick mounting bracket (office style seat)

Note
Take note of position and orientation of mounting hardware for reinstalling the joystick assembly.
1 Armrest plate
2 Locknuts
3 Spacers
●
Turn the adjustment lock lever (5) to release the joystick mounting tube (8) from the mounting
bracket (6).
●
Remove the joystick from the wheelchair.
●
Remove the three hex mounting screws (7), spacers (3) and locknuts (2) that secure the
mounting bracket (6) to the three mounting holes on the arm frame (4).
Note
The mounting bracket is mounted to the inside of the arm frame.
●
Reposition the mounting bracket (6) on the opposite arm frame.
●
Using the three hex mounting screws (7), spacers (3) and locknuts (2) secure the mounting
bracket (6) to the three mounting holes of the arm frame (4).
●
If necessary, perform the following to reposition the adjustment lock:
- Slide the adjustment lock from the mounting bracket.
- Rotate adjustment lock 180° and slide adjustment lock over the opposite end of the mounting
bracket.
●
Slide joystick mounting tube (8) through the mounting bracket (6) to the desired position and
secure adjustment lock to tube by turning lever on adjustment lock (5).
60
4 Mounting holes on arm frame
5 Adjustment lock lever
6 Mounting bracket
®
Invacare - PRONTO M41
7 Hex mounting screws
8 Joystick mounting tube