Invacare ProntoM41 Service Manual page 57

®
Invacare - PRONTO M41
●
Remove the locknut (2) and spacer (3) that secure the swingarm (4) assembly to the frame (9).
●
Remove the swingarm (4) and motor (5).
●
Remove the four screws (1) that secure the swingarm (4) assembly to the motor (5).
●
Separate the motor from the swingarm.
●
Position the new motor against the swingarm assembly.
●
Install the four screws (4) that secure the motor to the swingarm assembly.
●
Install the locknut (2) and spacer (3) that secure the swingarm assembly to the frame.
●
If necessary, repeat the steps for the motor on the other side.
●
Reverse the first nine steps to reassemble the base.
SERVICE MANUAL
57