Turbulator Installation; Reflector Installation - Roberts Gorden CTH2 Series Installation, Operation And Service Manual

ROBERTS GORDON ® CTH2-Series S

Turbulator Installation

Turbulator
2.5' Section
Turbulator
Adapter
Description
Turbulator Section 1
Turbulator Section 2
Tube

Reflector Installation

Hanger
Description
Tube/Reflector Hanger
Burner Tube
Reflector
© 2004 Roberts-Gordon
S
UBMITTAL HEET
Tab
Part Number
03051503
03051504
91409XXX
Burner Tube
Part Number
03090100
03051XXX
02750303
APPLICATIONS, ENGINEERING AND DETAILED GUIDANCE ON SYSTEMS DESIGN, INSTALLATION AND PRODUCT PERFORMANCE IS AVAILABLE UPON REQUEST. ROBERTS GORDON
INSTALLED ONLY IN ACCORDANCE WITH LOCAL LAWS, CODES AND REGULATIONS, AND ONLY BY A CONTRACTOR QUALIFIED IN THE INSTALLATION AND SERVICE OF GAS-FIRED HEATING EQUIPMENT.
Fold tab around outside
of tube nearest to the vent to hold turbulator
in place. Where a vent sleeve
is used, do not fold tab.
NOTE: All tube surfaces must be covered
by a reflector, except for a U-Tube.
Reflector
Turbulator must be installed in
the last standard section of
tube. Turbulator is not required
on the CTH2-125/150/175.
Turbulator Installation
Model Tube Section
CTH2-40 1st 10' Section
CTH2-60 2nd 10' Section
CTH2-80 2nd 10' Section
CTH2-100 3rd 10' Section
CTH2-125 N/A
CTH2-150 N/A
CTH2-175 N/A
Pull String
® PRODUCTS ARE TO BE