One-Foot Decorative Grille Installation; One-Foot Decorative Grille Bracket; Decorative Grille; Joint Piece And Reinforcement - Roberts Gorden CTH2 Series Installation, Operation And Service Manual

ROBERTS GORDON ® CTH2-Series S

ONE-FOOT DECORATIVE GRILLE INSTALLATION

One-Foot Decorative Grille Bracket

Decorative Grille Bracket
Description
Bracket

Decorative Grille

Description
Decorative Grille 8' x 1'

Joint Piece and Reinforcement

Joint Piece
Slip joint piece into
support bracket
and fasten to
bracket on one side
of the joint only.
Description
Joint Piece
Reinforcement
© 2004 Roberts-Gordon
S
UBMITTAL HEET
#8 Sheet Metal Screws
Cut relief notches for
supports and hangers.
Part Number
01363003
Spread apart brackets
and install
Decorative Grille.
Part Number
91406700
Part Number
01365903
01365902
APPLICATIONS, ENGINEERING AND DETAILED GUIDANCE ON SYSTEMS DESIGN, INSTALLATION AND PRODUCT PERFORMANCE IS AVAILABLE UPON REQUEST. ROBERTS GORDON
INSTALLED ONLY IN ACCORDANCE WITH LOCAL LAWS, CODES AND REGULATIONS, AND ONLY BY A CONTRACTOR QUALIFIED IN THE INSTALLATION AND SERVICE OF GAS-FIRED HEATING EQUIPMENT.
In order to maintain reflector shape, do
not fasten brackets together. Do not
fasten bracket to adjoining reflectors.
Maintain same slipjoint position as
reflectors.
Reinforcement
#8 Sheet Metal Screws
2"
Minimum
Bracket
Overlap
Joint Piece
® PRODUCTS ARE TO BE