ROBERTS GORDON
®
CTH2-Series S
GENERAL SPECIFICATIONS
Material Specification
Reflectors
.024 Aluminum
Heater Specifications
Ignition
Fully automatic hot-surface ignition with safety
shut-off.
General Specifications for CTH2-Series heaters are as follows:
End View
13.5"
(34 cm)
9.5"
(24 cm)
Heat Input
Model
(BTUH X1000)
CTH2-40
CTH2-60
CTH2-80
CTH2-100
CTH2-125
CTH2-150
CTH2-175
Gas Pressure at Manifold
Natural Gas:
LP Gas:
Pipe Connection
1/2" NPT (for CTH2-40, 60, 80, 100, 125)
3/4" NPT (for CTH2-150 & 175)
Dimensions
Vent Connection Size:
Outside Air Connection Size: 4" (10 cm)
Refer to figure above for dimensional information.
Gas Inlet Pressure
© 2004 Roberts-Gordon
S
UBMITTAL
HEET
Side View
17.5"
(44 cm)
Rate
Minimum
40
10' (3m)
60
20' (6m)
80
20' (6m)
100
30' (9m)
125
40' (12m)
150
50' (15m)
175
60' (15m)
3.5" w.c.
10.5" w.c.
4" (10 cm)
APPLICATIONS, ENGINEERING AND DETAILED GUIDANCE ON SYSTEMS DESIGN, INSTALLATION AND PRODUCT PERFORMANCE IS AVAILABLE UPON REQUEST. ROBERTS GORDON
INSTALLED ONLY IN ACCORDANCE WITH LOCAL LAWS, CODES AND REGULATIONS, AND ONLY BY A CONTRACTOR QUALIFIED IN THE INSTALLATION AND SERVICE OF GAS-FIRED HEATING EQUIPMENT.
Suspension Specifications
Hang heater with materials with a minimum working
load of 75 lbs (33 kg).
Controls Specifications
Time switches, thermostats, etc. can be wired into
the electrical supply. External controls supplied as an
optional extra.
Maximum or Minimum Length "A"
Reflector
Burner Tube
Length "A"
Maximum
10' (3m)
20' (6m)
30' (9m)
40' (12m)
50' (15m)
60' (18m)
70' (21m)
Natural Gas:
for CTH2-40,60,80,100,125,150 4.6" w.c. Minimum
for CTH2-175
LP Gas:
Electrical Rating (all Models)
120V - 60 Hz., 1.0 Amp (run) 5.0 Amp (Start)
Turbulator
(select models)
Recommended
Minimum Mounting Height*
Space
8'-10' (2.4 - 3m)
10'-12' (3 - 3.6m)
12'-15' (3.6 - 4.5m)
11' (3.3m)
12'-15' (3.6 - 4.5m)
12' (3.7m)
15'-20' (4.5 - 6m)
15' (4.6m)
20'-25' (6 - 7.6m)
20' (6.1m)
25' (7.6m)
5.0" w.c. Minimum
14.0" w.c. Maximum
11.0" w.c. Minimum
14.0" w.c. Maximum
Spot
8' (2.3m)
9' (2.7m)'
23' (7m)
®
PRODUCTS ARE TO BE