Download Print this page

Roberts Gorden Combat UHA S Series Equipment Specifications

Axial fan tubular unit heaters

Advertisement

Quick Links

Combat
UHA[X][S]-Series
®
Axial Fan Tubular Unit Heaters
Equipment
Specifications
1.800.828.7450
www.rg-inc.com

Advertisement

loading

Summary of Contents for Roberts Gorden Combat UHA S Series

  • Page 1 Combat UHA[X][S]-Series ® Axial Fan Tubular Unit Heaters Equipment Specifications 1.800.828.7450 www.rg-inc.com...
  • Page 2 GAS-FIRED UNIT HEATER GUIDE SPECIFICATION PART 1 GENERAL least 24 months, subject to the manufacturer’s standard warranty limitations. Provide gas-fired unit heaters, designed and manufactured for PART 2: PRODUCTS indoor use. 1.1 SECTION INCLUDES 2.1 MANUFACTURERS A. Unit Heater A. COMBAT® by Roberts-Gordon UHA[X][S]-Series B.
  • Page 3 2.5 COMBUSTION AIR AND VENTING COMPONENTS control terminal shall allow for 2-wire heating control or 4-wire heating and “fan only” control. A. Vent Box: The vent box shall be of [aluminized steel] [409 stainless steel]. 2.8 OPTIONS AVAILABLE B. Flue Fan: Each unit shall have a factory-installed flue fan to draw (Select Applicable Options) combustion gases through the heat exchanger and into the flue venting.
  • Page 4 PART 3: EXECUTION manufacturer of the vent terminal. Properly support venting. Penetrations through combustible surfaces must obey all venting clearances defined by local codes 3.1 INSTALLATION and heater and venting manufacturers. Vent insulation recommended depending on vent lengths as indicated by A.

This manual is also suitable for:

Combat uha seriesCombat uha x series