Gas Piping; Gas Connection With Stainless Steel Flex Connector - Roberts Gorden CTH2 Series Installation, Operation And Service Manual

ROBERTS GORDON ® CTH2-Series S

GAS PIPING

Gas Connection with Stainless Steel Flex Connector

Shut-Off Valve
(included with connector)
Stainless Steel Flex Gas Connector
Description
1/2" Flex Gas Line
3/4" Flex Gas Line
© 2004 Roberts-Gordon
S
UBMITTAL HEET
2" (5 cm)
12"
(30 cm)
Part Number
91412200
91412203
APPLICATIONS, ENGINEERING AND DETAILED GUIDANCE ON SYSTEMS DESIGN, INSTALLATION AND PRODUCT PERFORMANCE IS AVAILABLE UPON REQUEST. ROBERTS GORDON
INSTALLED ONLY IN ACCORDANCE WITH LOCAL LAWS, CODES AND REGULATIONS, AND ONLY BY A CONTRACTOR QUALIFIED IN THE INSTALLATION AND SERVICE OF GAS-FIRED HEATING EQUIPMENT.
Shut-Off Valve must be parallel to
burner gas inlet. The 2" (5 cm)
displacement shown is for the cold
condition. This displacement may
reduce when the system is fired.
Horizontal
Hold gas nipple securely
with pipe wrench when
attaching the flex gas
connector.
Failure to follow these
instructions can result in
product damage.
45°
Rear View
® PRODUCTS ARE TO BE