Table of Contents
Advertisement
Considerations
Caller ID service must be ordered from the local telephone operating
l
company or the interexchange carrier.
Caller ID' Auto DISA
(CPC-A II Version 6.1 or higher and CPC-B Version 6.1 or higher)
A DBS equipped for Caller ID (CID) can provide automatic DISA dial tone
based on Caller ID information. This allows up to 10 predetermined users to
access the DISA feature without requiring a trunk be left in the DISA mode.
When a CID call is sent to the DBS, the CID number is checked against the
table. If the number is found, the caller will automatically be connected to
DISA dial tone.
Related Programming
. FFl (System Programming): Automatic DISA
Hardware Requirements
Loop-start trunk card (VB-435 11.4)
l
Caller ID circuit card (VB-435 11)
l
MFR card (Caller ID Auto DISA)
l
Considerations
Caller ID feature must be enabled.
l
DBS-70-700
DBS Manual - Issued 8/l/95
Page 2-15
Advertisement
Table of Contents
