Table of Contents
Advertisement
Chapter 2. System Features
from an extension, give instructions to an entire group, or Communicate wi&
several people at once. If an external paging system is connected to your
system, pages can also be sent through its speakers.
Beginning with CPC-B Version 3.1, the Paging feature can also be
programmed to time out after sixty seconds. When a page call times out, a
busy tone is sent to the extension that initiated the page.
Operation
To use the Paging feature:
1. Pick up the handset.
2. Press "#," then enter the number of the desired Paging Group (00-07).
3. Make your announcement.
4.
Related Programming
l
l
Hardware Requirements
l
Considerations
l
l
l
l
Page 2-40
The EXT LED lights.
Replace the handset,
FF3 (Extension): Extension Page Group
External relays and an amplifier are required for external paging.
If an external paging system has been connected to Paging Groups 00-07,
pages can be made through the external speakers. Voice Paging can also be
heard over the extensions in groups 00-07.
An extension can belong to more than one paging group.
A maximum of eight Paging Groups can be assigned to a system.
Only one page may be performed at a time with one exception. Pages to
group 00 always take priority. If you page group 00 while another
extension is paging group 01-07, the other page terminates. The other
pager receives busy and "Page Overridden" displays on the telephone.
DBS Manual - issued 8/l/95
Section 700 - OpefaikTr.
DBS-70-700
Advertisement
Table of Contents
