Table of Contents
Advertisement
Section 700 - Operation
4. Replace the handset.
To make an Tone Call:
1. Rick up the handset.
2. Dial the extension number.
3. If the system default is voice calling, dial "1."
. x x x . "
4. Complete the call and replace the handset.
To transfer a call using Tone Calling:
1. Rress.the HOLD
2. Dial the number of the extension to which the call will be transferred.
3. If the system default is voice calling, dial "1."
4. Replace the handset.
The phone issues intercom dial tone.
Note:
preference, press the FF key programmed for intercom operation.
"Call-EXT XXX" (where "XXX" is the extension) appears on the
l
display. If the extension name has been stored, that name appears,
rather than the extension number.
The called extension rings and the EXT LED flashes.
l
When the call is answered, Talk-EXT XXX" (where "XXX' is the
l
extension) appears on the display. If the extension name has been
stored, that name appears on the display after "Talk" instead of "-EXT
The EXT LED goes off.
key.
The EXT LED flashes.
l
"Hold-EXT XXX" (where "XXX" is the extension) appears on the
l
display.
"Call-EXT XXX" (where "XXX" is the extension) appears on the
display.
Chapter 4. Key Telephone Features
4-57
Advertisement
Table of Contents
