Table of Contents
Advertisement
Section 700 - Operation
(All Versions)
Descriptions
The DBS provides two methods of intercom calling: voice calling and tone
calling.
Voice Calling. With voice calling, intercom calls are connected
immediately, without a ringing tone.
Tone Calling. With tone calls, a ringing tone is sent to the called extensidn.
System programming determines whether the DBS uses voice or tone calling
as a default. If voice calling is the default, dialing a "1" after the extension
number changes the call to a tone call. lf tone calling is the default, dialing a
"1" results in a voice call.
Operation
To make a Voice Call:
1. Lift the handset.
2. Dial the extension number.
3. If the system default is tone calling, dial a "1."
To make an Tone Call:
1. Lift the handset.
2. Dial the extension number.
3. If the system default is voice calling, dial a " 1."
l
l
l
The .called extension will ring.
Version 4.0 or higher)
DBS Manual - issued 811196
Chapter 6. SLT Features
6-25
Advertisement
Table of Contents
