Call Waiting - Panasonic Section 700 Operation

Chapter 4. Key Telephone Features
(For example, if you transfer an outside call on line 1 to extension 135 and
that
extension and "Recall 135 #Ol" will appear on the display.)

Call Waiting

(All Versions)
Description
You can send a Call Waiting signal, followed by a brief LED message, to a
busy extension. The party receiving the message need only replace the
handset and then pick it up again to be automatically connected to the
message sender's extension.
The following messages can be sent using the Call Waiting feature:
Table 4-4. Call Waiting Text Messages
Message codes O-4 are not available.
With CPC-AI1 and CPC-B Version 4.0 or higher, users can also respond to
call waiting by sending a text message. See "Call Waiting/OHVA Text Reply"
on page 4-3 1.
Operation
To set Call Waiting:
2. Dial the extension number.
extension after Transfer Recall Timer expires. The other extension's
number and the number of the transferred CO line or extension then appear
on your display and the call is returned to your extension.
extension is busy or does not answer, the call will return to your
Message
Code
5 .
6
7
ON/OFF
key.
The phone issues busy tone.
Section 700 - Operation
Message
"Visitor Here"
"Need Help"
"Important"