Panasonic Section 700 Operation page 215

Section 700 - Operation
To Cancel an Absence Message
1. Lift the handset or press ON/OFF.
2. Dial "7 1."
3. Replace the handset or press ON/OFF.
Related Programming
l
l
l
Considerations
l
l
l
Table 5-2. Example Return Times for Absence Messages
Version 3.1 or higher)
FF3 (Extension) Extension Class of Service Assignment (CPC-AI1 and
CPC-B Version 3.1 or higher)
FF6 (Names and Messages): Absence Messages
Extensions without displays get a busy signal, rather than the Absence
Message.
If an extension user selects a message code number 5-9 that has not been
set up with a message, "Absence," followed by the code number, appears
on the caller'sdisplay.
Absence Message return times can be entered as shown in Table 5-2:
Input
No input
9
11
615
1035
Four-digit numbers can also be entered (0000-9999 = Hours & Minutes or
Month & Date).
In CPC-A and WC-B Versions prior to 5.0, DND and Absence Messages
cancel Call Forwarding. Beginning with Version 5.0, calls to an extension
with DND or Absence Message turned on are treated differently, depending
on whether they are trunk or intercom calls. Intercom calls receive busy
tone; trunk calIs are routed to the extension defined in Permanent Call
DBS Manual - Issued 8/l/95
Chapter 5. DSLT Features
Display
Return
Return 9:00
Return 1l:OO
Return 6:lS
Return lo:35
.
5-5