Call Forwarding - Panasonic Section 700 Operation

Chapter 6. SLT Features
Considerations
l
l

Call Forwarding

(All Versions)
Call Forwarding allows users to send their calls to another extension, to an
outside line, or to voice mail. All versions of the DBS provide call
forwarding; however, some call forwarding enhancements are not available
with earlier versions. The following table shows the call forwarding features
available with each release.
Table 6-3. VRS Call Forwarding features
Call Forwarding--All Calls
Cal 1 Forwarding--Busy
, Call Forwarding--Busy/No Answer
Call Forwarding--All Calls.
calls to an extension are forwarded immediately.
Call Forwarding--No Answer.
unanswered call rings until the Call Forward No Answer timer expires. When
the timer expires, the unanswered call is forwarded.
Call Forwarding--Busy.
to a busy extension are forwarded to a designated extension.
You cannot break in on three-party conference calls.
The default for the override alert tone is "off." If the override alert tone is
enabled, the tone will be sent to both parties when a call is overridden.
-- -- DBSManual--- Issued 8/l/95
All versions
CPC-AI1 and CPC-B Version 2.0
or higher
All versions
All versions
CPC-A, CPC-AII prior to 7.0 and
CPC-B prior to 7.0. Beginning
with CPC-AII and CPC-B Ver-
sion 7.0, all forwarding types (All
Calls, No Answer, Busy, Busy/No
Answer) allow call forwarding
outside -- eliminating the need for
Call Forwarding--External.
or higher
When this feature is activated, all incoming
When this feature is activated, an
When this feature is activated, all incoming calls
Section 700 - Operation
I