Panasonic Section 700 Operation page 159

Section 700 - Operation
6. Press the AUTO
7. Enter the Speed Dial code (System Speed dial 00-89 or Personal Speed
8. Press the HOLD
To assign Call Forwarding to a Hunt Group pilot number or an
extension number to an FF key:
1. Press the
2. Press the PROG
3. Press the FF key to be programmed.
4. Enter "72."
5. Enter the Call Forwarding code (0, 1, 2, or 4).
6. Enter the Hunt Group pilot number or an extension number.
7. Press the HOLD
To erase a code stored in an FF key:
Note:
procedure. CO line keys can only be cleared through system programming.
1. Press the
2. Press the PROG
3. Press the FF key to be programmed.
4. Press the HOLD
"ENTER FWD EXTW appears on the display.
key.
dial 90-99 or 900-909).
Note: The speed dial code must include the
trunk call), the appropriate trunk access code, and the outside number.
key.
Calls will now be forwarded according to the forwarding type selected.
ON/OFF
key.
key.
"Enter Code" appears on the display.
key.
FF keys assigned as CO lines cannot be cleared using the following
ON/OFF
key.
key.
"Enter Code" appears on the display.
key.
"Code Cleared" appears.
Chapter 4. Key Telephone Features
CONF
key (to indicate a